Prototype workshop
Products are developed here: Our MakerSpace is equipped with everything needed to create prototypes. Whether 3D printer, laser cutter or CNC milling machine: After a short introduction, our equipment can be used even without prior knowledge. This is how the first products are created, which you can then test in the market.
Machine offers of the MakerSpace at a glance
Our machines and devices in the MakerSpace are divided into different categories. These machines and devices are each marked with a red, a yellow or a green circle (sticker on the machine). In order to use our machines and devices in the MakerSpace, you need in any case an instruction in the respective. In the green area you may work independently and alone on the machine. In the yellow area, a MakerSpace employee must be present and accompany your work process. In the red area, only MakerSpace employees are authorized to use this machine.
In the field of textile processing we have an embroidery machine, a sewing machine and two cutting plotters on site, with which you can be creative. Available machines: Brother PR670e embroidery machine With the help of Brother PR670e embroidery machine, you can make machine embroidery by sewing on or sewing in threads and even with six different colors at the same time.
- embroidery area different inserts: mini: 60 x 40 mm small: 100 x 100 mm medium: 180 x 130 mm large: 300 x 200 mm
- six needles -> six different colors possible
Pfaff Performance icon sewing machine For the textile sector, we have for you a top class elegant sewing machine with high quality technology and superior performance for ultimate creativity in sewing on the spot.
- Sewing area Max. 310 mm wide & 140 mm high
- Space under sewing head: 76.2 mm
- Stitch width max. 9 mm
- Stitch length max. up to 5 mm
Silhouette Cameo 4 cutting plotter Furthermore, we have provided cutting plotters for you, in which a knife is used instead of a pen to cut desired contours in foil or similar material. You can use this foil later, for example, as stickers and lettering for your prototype.
- 12" approx. 30.5 cm working width
- Material that can be cut: Iron-on film Paper Vinyl film Cardboard Fabric Leather Balsa wood Foam rubber
Transfer Press Secabo TS7 SMART The transfer press Secabo TS7 SMART is used for textile finishing, transferring texts, pictures, logos or fashionable motifs onto textiles or other materials.
- automatic swing mechanism: extra large working area for convenient alignment of the transfer objects
- base plate with the dimensions 40cm x 50cm
- Suitable for transfer objects from 0mm - 70mm height
- Modular design, compatible with different heating and base plates
- Bluetooth interface for Secabo App with own transfer database
- Digital controller for temperature, time, prepress, counting function
- Max. Contact pressure of 250g/cm² achievable with low manual force
In the field of electrical engineering we offer you simple measuring and testing tools, soldering stations and basic material for the development of test circuits on plug-in boards. We are also happy to support you in designing circuits and PCBs using eCAD (Autodesk Eagle).
Available machines:
Basetech BT-3010 Laboratory Power Supply With the Basetech BT-3010 Laboratory Power Supply you can supply circuits or individual components with a defined voltage or current.
- Number of outputs: 1
- Output voltage: 0 - 30 V/DC
- Output current: 0 - 10 A
- Power output: 300 W
- Plug connection: 4 mm
Rigol DS1054Z Digital Os cilloscope With the Rigol DS1054Z Digital Oscilloscope, you can measure classic measurands, such as the voltage and the period of a signal. Both together result in the alternating voltage.
- 50 MHz bandwidth
- 4 analog channels
- Innovative UltraVision technology
- USB interface
- 17.78 cm TFT color display
Weller WE 1010 soldering station With the Weller WE 1010 soldering station and with the help of e.g. solder, it is possible for you to join metal together.
- Use of ET soldering tips
- 1-channel supply unit with soldering iron WEP 70 and safety rest PH 70
- automatic standby mode protects tool and environment
- ESD safe soldering station, soldering iron and heat resistant silicone cable
- 70 W soldering iron with ergonomic design and tool-free tip change
+ Extraction system & lamp magnifier LPKF circuit board plotter The LPKF ProtoMat S64 is a circuit board plotter for processing printed circuit boards.
- Fully automatic operation including automatic tool change
- Camera controlled fiducial recognition and milling width control
- Granite base
- Manufacturing of fine structures up to 100 μm
- Production of multilayers
Multimeter With the help of the multimeter, it is possible to measure various electrical quantities, including voltage, current, resistance, frequency,... Other:
- Side cutter
- Wire stripper
- Crimping pliers
- Multicrimp Pliers
- Plug-in boards
- jumpers
- Crimp connectors
- Heat shrink
- Insulating tape
- Wire end ferrules
- Solder
- Cable/Litz
- Euro boards
Available machines and equipment: Stainless steel vacuum chamber The vacuum chamber is used for degassing casting materials such as silicone, resin (polyurethane, polyester, epoxy resins), plaster, wax.
- Stainless steel container inner dimensions 400mm(diam.) x 400mm(H) volume 50,0L
- Tempered glass lid
- silicone gasket of 60°ShA hardness and 190°C heat resistance
- tight valve island with a vacuum meter and air filter+ vacuum pump
Airbrush unit At the airbrush unit you can color your prototype. Due to the stepless dosing of the color it is possible to spray fine transitions as well as to fill large areas.
- case with 37 different colors
- plug-in/combinable exhaust system
Scheppach HC24Si Compressor The Scheppach HC24Si whisper compressor allows you to use numerous tools that are powered by compressed air. Samsung Flip 2 WM55R The Samsung Flip 2 WM55R is a digital flipchart with an interactive touch screen that allows you to intuitively create and then save or send digital notes. In addition, it is transportable due to its stand with wheels. CAD Stations At our CAD stations (available computers) you can design your components, post-process 3D scans, prepare 3D prints or create vector files. The appropriate programs are already pre-installed.
- AutoDesk Fusion360https://www.autodesk.de/campaigns/education/fusion-360
- Curahttps://ultimaker.com/de/software/ultimaker-cura
- PrusaSlicerhttps://www.prusa3d.com/page/prusaslicer_424/
- PreFormhttps://formlabs.com/de/software/
- Inkscapehttps://inkscape.org/de/release/inkscape-1.1.1/
- Artec Studios
Technical drawing utensils A3 drawing board, ruler, set square, etc.
Thermal imaging camera With the help of the thermal imaging camera it is possible to electronically display the distribution of the surface temperature of objects based on the measured infrared radiation.
Contact
The use of the CET infrastructure is free of charge for aspiring founders. Start-ups that have already been founded can use our offers within the framework of a de-minimis grant.
The regular opening hours of the Maker- and DataSpace are Monday to Thursday from 9:00 to 15:00. Here you will always find one of our Maker and DataSpace staff*in on site. Outside these regular opening hours you can reach us via our CET MakerSpace email address. In exceptional cases, we can work together to arrange appointments that deviate from the regular opening hours. We are looking forward to your request.